SG vitrified grinding wheel Usage:
Suitable for horizontal/ vertical shaft grinding and super slim
from grinding (HRC64º)
SG(Seeded-Gel) abrasive material made from the special lead crystal
gel system sintering , it is a new revolutionary aluminum oxide
abrasive material, with higher hardness, good toughness, strong
Compare with the normal corundum material , it has about 2-3 times
working efficiency and stronger sharpeness.
And it has a longer working time, about 5-10 times compare with the
normal corundum material products.
And its price is much cheaper than CBN(Cubic Boron Nitride)
SG grinding wheels can be good used for grinding the workpiece of
alloy, quenched steel, tool steel, cast iron, and other hard
types of Grinding Wheels
To the left is an image of a straight wheel. These are by far the
most common style of wheel and can be found on bench or pedestal
grinders. They are used on the periphery only and therefore produce
a slightly concave surface (hollow ground) on the part. This can be
used to advantage on many tools such as chisels.
Straight cup wheels are an alternative to cup wheels in tool and
cutter grinders, where having an additional radial grinding surface
The Parameters Of Ceramic Abrasives :
Main Chemical Composition
(Grain Size 60)
|The Offerable Grain Size||Code|
Bulk Density 1.82(G/Cm³)
Crystal Size 0.15 (Μm)
Feature of Vitrified SG grinding wheels :
SG abaraisve wheel is made from microlite bond corundum
abrasives.This product usually used for finishing grind;It is
widely used in hole making and forming grinding to hard-grinding
stuff;with the character of sharply cutting, low grinding temperature, less repair and
maintainance, long service life.
Application of Vitrified SG grindingwheels :
widely used for speed steel,tool steel, cars apartment, bearing,
hole of hydraulic part; and also the grinding of crank, crank shaft
and camshaft of care engine and transmission set, worm, gear wheel,
HSS broach, milling cutter and so on.